2

DIY : Beaded hemp bracelet

-

hemp braceletsHey guys so today I am going to be showing you how to make the hemp beaded bracelet with an adjustable finish.
The first thing you will need is some hemp thread 60 inches long, folded in half, so you have 2 strands 30 inches long
A second piece of hemp thread 20 inches long.
A pair of scissors
And some beads of your choice

The first thing you want to do is string a bead onto the 20 inch strands and tie a knot a couple of cm away from the end. Place this string in your clip board and pull it up about 4 inches. (This part will be used later for the finish)

Then take your loop and place that in the clipboard like so.

You then want to lay out your strands with the 20inch long strand in the middle. You then want to o 6 macramé knots or square knots. If you are unsure of how to d this, then you can check out the tutorial on my channel.

Once you have done that, you want to take your middle strand, and thread on a bead of your choice. Push it down the thread, and then do 2 square or macramé knots. Make sure you pull each knot really tight.

Then you repeat this for the rest of the bracelet. So you take another bead, thread it on your middle strand. Do 2 macramé or square knots and pull them really tight.

You want to do this for the rest of your bracelet, until it is the length you would like it to be.
So I have finished my bracelet. You can’t really see it very well, but after the last bead, I did 4 macramé knots to finish the bracelet and secure the beads on properly.
You want to then take your middle strand and thread on another bead. Then tie a knot a cm from the end of the thread. (Similar to the beginning of the bracelet)

Then you can cut off the two extra tassels.
On the other side of the bracelet, I am just going to cut the loop off, as we do not need this either.
We should be left with a bracelet and 2 pieces of thread with beads on either side. You can choose to finish the bracelet off this way, and tie them together, but I am going to make an adjustable macramé sliding knot. I have a detailed tutorial up on my channel so check it out if you want a clearer description.
Basically, I am crossing the threads over one another and placing one end in the clipboard to secure my work space.
Basically, I am just going to take a piece of thread I have left over, and place it under the tassels, and do a square knot. The first knot will be a little tricky, because the string isn’t attached, but it shouldn’t be too difficult. I am then going to do 6 further macramé knots.

I am then going to cut off the tassels. Don’t forget to dab some glue or clear nail varnish on the ends of all the knots where you cut tassels from, as these can easily come undone.

And now you’re done!
Leave me a video response if you make one yourself or comment and let me know how it goes!
Buy guys.

Duration : 0:9:4

(more…)

Technorati Tags: , , , , , , , ,

2

Tutorial: Beaded Hemp Choker

-

hemp usa storesSUBSCRIBE & LIKE US ON FACEBOOK – Crafty Lashy Creations
How to make a Hemp choker or bracelet with beads in it!

LINKS
http://www.etsy.com/shop/lashyon

http://www.bonanza.com/booths/lashyon

ADDRESS
70 Hairpin Drive
SIUE #035
Edwardsville IL 62026

Duration : 0:13:1

(more…)

Technorati Tags: , , , , , , , , , , , , , , ,

8

How to Make : A Fishbone Hemp Bracelet – DIY

-

hemp bracelets*READ ME !*

This pattern looks complex and first , and being honest , it does get a bit tricky with all the strings (it’s kind of confusing at first) but once you get the hang of it , it looks super cute & it pretty easy too !

Experiment with how tight or loosely you pull the strings when tying a knot . Tight gives you an oval shape , loose gives you a circle .

The bit I make in this video looks really messy , and not very good , but that’s just because I was sitting VERY awkwardly . I recorded this video at night , so I had to use my desk lamp for more light . I had to put it beside me , but also kind of infront of the clipboard so there wasn’t so much shadow . I had to have one arm around the lamp , (being careful not to touch it since it was hot) and the other one out awkardly , because i didnt want it blocking the camera’s view .

The picture I showed at the beginning is off of Google Images , but if you do this pattern correctly , it should turn out like that .

*GO SLOWLY ! For best results , don’t rush ! Take your time on making your ovals/circles PERFECT . Don’t rush like I did !
*Make sure your glue is CLEAR and VERY strong . I’ve never tried school glue or a hot glue gun with hemp , but I have the feeling they wouldnt work very well … But if you do try it , tell me how it goes !

How to start & finish hemp bracelets : http://www.youtube.com/watch?v=7091t0GW0PM

Duration : 0:7:56

(more…)

Technorati Tags: , , , , , , , , , , , ,

25

ღMake Hemp Bracelet: Pretzel Knot ღ

-

hemp braceletsDon’t forget to subscribe!
HOW MUCH HEMP: I would say to start off, wrap the hemp around your wrist 5 times and double the length
here is a fun new difficult pretzel knot for hemp/macrame jewelry bracelet: NOT easy for beginners!

Want to buy a gift? Check out my page:
https://www.facebook.com/pages/Shell-Candii/121906471193415

Duration : 0:4:31

(more…)

Technorati Tags: , , , , , , , , , , , , , ,

25

Essential Cannabis Hemp Oil Making Tutorial Using Safe Countertop Distiller & FROZEN Alcohol

-

hemp usa storeshttp://www.nutriteam.com/servlet/the-304/Megahome-EasyStill-alcohol-distiller/Detail

https://secure.brewhaus.ca/index.aspx?page=productsList&CategoryID=31

This excellent and safe step-by-step tutorial shows you how to make essential cannabis oil (hemp oil) with a distillation device that reclaims alcohol solvent; thus minimizing risk of explosion or fire. Please use common sense and plenty of fresh air flow. Follow directions to the letter if you want the same results use the method with the rice cooker shown in the video called “How to Make Rick Simpson’s Hemp Oil Safely”. Strong indica female cannabis buds should produce about 60 grams of oil from approximately 1 pound of dry cannabis buds; this oil can be applied directly to the skin for skin cancer or lesions, vaporized for lung conditions like asthma/COPD/lung cancers, or most popularly ingested for internal illnesses like cancer, diabetes, Crohn’s, chronic pain, insomnia, warts, abnormal or changing moles, cysts… the list goes on and on and on…

For more information on hemp oil and the healing power of truth, please visit www.phoenixtears.ca for full dosage instructions and precautions… and make the medicine! Your life is in YOUR hands now.

Studies show repeatedly that THC combined with CBD give the most effective cannabinoid treatment against aggressive cancers. Buds and popcorn buds are best. Scientists and chemists who work with this product suggest avoiding leaf, stem, and “shake” if you want quality medicine. Lower quality cannabinoids that are commonly found lower on the plant than the bud itself will not effectively cure cancers or other illnesses like the cannabinoids on the buds (female cannabis flowers). If your time or the time of a loved one is hanging in the balance, you have no time to waste.

NOTE: DUE TO THE CONCENTRATION OF CANNABINOIDS REQUIRED FOR THE BODY TO USE CANNABIS FOR DISEASE CONTROL, NO AMOUNT OF SMOKING CANNABIS WILL BE EFFECTIVE FOR THIS PURPOSE.

I offer this video as an alternative to using a rice cooker, only for demonstration purposes. If you choose this over what Rick Simpson has recommended, please share your results. i do not recommend using this method over and above Rick Simpson’s method described in RUN FROM THE CURE.

Please see other videos on this channel for more information on the healing power of cannabis, and be sure to watch RUN FROM THE CURE: The Rick Simpson Story… the man who rediscovered hemp oil is a cure for cancer…and shared it with the world.

Everclear is found in many liquor stores as 95% alcohol. DO NOT USE CAMP FUELS TO MAKE CANNABIS OILS AS THEY CONTAIN RUST INHIBITORS WHICH WILL NOT BE EVAPORATED DURING THE BOILING PROCESS AND WILL RENDER YOUR MEDICINE POISONOUS.
99% Isopropyl alcohol is effective as well, as it all boils away without a trace. Anything less than these high test alcohols will not be effective. I suggest staying away from butane extractions because of the risk and the potential for fumes to ignite.

Always do this outside.

Duration : 0:9:36

(more…)

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,